Myco Wall Bracket

The stainless steel Myco Wall Bracket is designed to support a Swivel Bather when the lip on the wall side of the bath is less than the recommended 1¼ inches (30mm).

When using a Swivel bather it needs at least 1¼ inches (30mm) of each arm of the base unit to rest on the bath sides.

The wall bracket is located so that it rests on the edge of the bath and is secured to the wall using suitable fixings. When fixing the wall bracket to the wall, the same considerations apply as for the fixing of grab rails.

The Myco Wall Bracket is constructed from epoxy coated stainless steel. The dimensions are 22" x 3" x 1.75" (560mm x 80mm x 45mm).

The Myco Wall Bracket can also be used for other products which require a wider ledge on the wall side of the bath.