Swivel Bather for Corner Baths

The Swivel Bather is a turning bath seat that allows easy transfer over the bath. The user sits on the seat from the side of the bath and then swivels over the bath for a wash or shower. The comfortable seat provides back and arm support and is ideal for people who feel insecure on a bath board.

The Swivel Bather for Corner Baths rests on any corner bath. The base has extendable tubes which are easily adjusted to accommodate most corner baths. It is easily removed so that others can use the bath.

The Swivel Bather for corner baths is made up of two parts: A base frame which rests on the sides of the bath and a seating unit which rotates on the base. The two parts separate easily for handling or storage.

The seating unit has a plastic seat with small drainage holes and is easy to clean. The base frame has four arms which rest on the bath. Each of these has a non-slip rubber end- covering. There is also an adjustable positioning screw to prevent accidental slipping. At least 1¼" (30mm) of each arm must rest securely on each side of the bath.

The seat locks in both the transfer (facing the side) and the showering position (facing over the bath tub). The locking lever is on the right hand side of the seat but all models can be requested with the lever on the left hand side.

Extendable support tubes are separately adjusted to accommodate the shape of the bath. The extended tubes are kept in place by a single bolt and nut which will require a spanner to tighten. Each arm of the base unit can be extended from 32" to 47" (810mm - 1200mm).

The seat height is 3½" (90mm) above the sides of the bath.

All metal parts are stainless steel.

Weight of base unit including extension tubes is 14.5 lbs (6.5kg). Suitable for users up to 20 stone (127Kg).

This model can also be used for very wide baths with a width greater than 32" (810mm).