adjustable width Swivel Bather | Instructions

Step 1 - Adjusting the width of the base frame

Adjust the length of each arm of the base frame by turning the grey handles:

The width of the base can be adjusted from 26" (660mm) to 30" (760mm).

Step 2 - Fitting the base frame over the bath

Rest the base frame securely on the bath. At least 1¼ inch (30mm) of each arm must rest on the sides of the bath. Turn the positioning screws on both sides until the black rubber ends are just touching the sides of the bath.

Step 3 - Fitting the seat

Place the seat on the base frame. The socket under the seat locates over the swivel pin of the base frame. Ensure that the seat rotates freely. Lock the seat by pushing the black knob on the locking lever gently down until the lock locates in the slots in the base frame.

Step 4 - Using the Swivel Bather

	Swivel the seat to face the side of the bath and lock into position. The user can now be seated.	Unlock the seat by lifting the locking lever and transfer legs over the side of the bath.	Lock the seat when over the bath for extra security while washing or showering.