Swivel Bather for Corner Baths | Instructions

Step 1 - Assemble the Base

Remove the screws from the base frame tubes. Slide the two extension tubes into the base frame as shown. (Line up the twin holes in the extension tubes with the multiple holes in the base frame tube.)

Place the base frame over the bath with the plastic end covers resting on the front of the bath.

ISlide the extension tubes out so that the plastic ends rest on the back edge of the bath and touch the back walls. In selecting the most suitable position ensure that the front of the base frame and the ends of the extension tubes each have a minimum of 1¼" (30mm) resting on the sides of the bath.

Place the seating unit over the pin on the base frame and adjust the unit into the position required. Ensure that the seat rotates and the locking device engages without any obstruction. (Do not sit on the seat at this stage.)

Having now determined the correct length of the two extension tubes, remove the seating unit and align one of the twin holes in each extension tube with the nearest hole in the base frame. Insert the screw provided and secure with the nut with a spanner.

It is important that the screw is inserted from the outside of the frame so that the nut, which protrudes, is on the inside. The nut must be tightened until the end of the screw protrudes through the nut.

Step 2 - Fitting over the bath

Check again that the unit fits safely over the bath. If required the base length can be adjusted by choosing a more suitable hole in the extension tube.

Replace the seating unit.

Adjust the positioning screw at the front of the base frame so that the black rubber end is just touching the inside of the bath.

The Swivel Bather is now ready for use.

Step 3 - Using the Swivel Bather

Swivel the seat to face the side of the bath and lock into position. The user can now be seated.

Unlock the seat by lifting the locking lever and transfer legs over the side of the bath.

Lock the seat while over the bath for extra security while washing or showering.

Maximum user weight is 20 stone (127Kg)