Swivel shower chair | Instructions

Assembling the Swivel Shower Chair

Place the base where it is required - for example in the shower cubicle or near the wash basin.

Place the seat on the base. The socket under the seat locates over the swivel pin of the base. Ensure that the seat rotates freely.

Lock the seat by pushing the black knob on the locking lever gently down until the lock locates in the slots in the base. The locking lever may be stiff at first but this will ease with use.

Adjusting the height of the Swivel Shower Chair

Adjust one leg at a time:

Remove the C-Clip on the leg by pushing the open side and pulling out the pin.

Adjust to the height required - so that one of the holes in the extending leg is visible through the hole in the outer leg.

Replace the C-Clip. Ensure that the pin goes through both holes in the outer leg and the plastic ring is locked in position.

The seat height can be adjusted from 17¾"(450 mm) to 21¼"(540 mm)