Home | News | Contact us | About Myco | Price List

Product Page
FAQ's
Instructions
Product Information

standard Model	SB
24" model	SB24
26" model	SB26
Lefthand Locking model	SBL
Max user Weight	16stone 102kg
Price	£124

Printable Factsheet

Swivel Bathers

Shower Seats

Myco Accessories

Myco Swivel Bather | technical details

The Swivel Bather has a base frame which fits over the bath and a seating unit which rotates on the base. The two parts each weigh 7lbs (3.2Kg).

Tubing is epoxy coated mild steel. All other metal components are stainless steel. In particular the critical turning components, the base plate and the swivel pin, are stainless steel and no servicing or lubrication is required.

The seating unit has an easy to clean plastic seat with drainage holes about 8 mm in diameter in keeping with the relevant British Standard.

The base frame has non-slip plastic ends which rest on the bath sides. Positioning screws on either side also help to prevent movement.

The locking lever is on the right hand side - left hand locking is available for all models on request.

Selecting a model:

To decide which model best suits your bath, measure the inside width near the top of the bath X and the outside width of the bath Y.

Model	X (Inside bath width)	Y (Outside bath width)
24" model	17" to 21" (430 - 535mm)	22" to 26" (560 to 660mm)
26" model	19" to 23" (485 - 585mm)	25" to 27" (635 to 685mm)
Standard (28")	21" to 25" (535 - 635mm)	27" to 31" (685 to 785mm) or more
Adjustable model	17" to 27" (430 - 685mm)	25" to 30" (635 to 785mm)

Seat Dimensions:

	Seat width:	17½" (445mm)
	Seat depth:	16" (405mm)
	Backrest height:	14" (355mm)
	Width between arm rests:	19" (485mm)
	Seat height above side of bath:	2" (50mm)

Base Dimensions:

	Distance between arms (measured at outside edge of arms):	21" (535mm)
	Width over bath:	24"
		26"
		28" (Standard model)
		Adjustable width

Myco Limited

31 Malpas Drive Pinner Middx HA5 1DQ

Tel: 0845 230 1202

Fax: 0845 230 1204